Generic selectors
Exact matches only
Search in title
Search in content

What To Know About Molten Vacuum Pressure Impregnation

Metcar
Metcar What To Know About Molten Vacuum Pressure Impregnation

What To Know About Molten Vacuum Pressure Impregnation

By: Metcar

Despite today’s technology and careful production techniques, porosity is a product of the manufacturing process. The binders used in the production of carbon graphite and graphite carbonize during the baking operation cause outgassing hydrogen and other gasses. These gasses create a network of interconnected porosity as they tunnel through the surface. Porosity in carbon graphite and graphite materials is inevitable.

Many applications that use carbon graphite and graphite, like mechanical seals, do not allow for porosity to exist. There is a practical solution to fill these voids: vacuum pressure impregnation.

What Is Molten Vacuum Pressure Impregnation?

Molten vacuum pressure impregnation (MVPI), also known as porosity sealing, is a process used to seal porosity in carbon graphite and graphite by use of vacuum and pressure. Vacuum impregnation can effectively eliminate both micro-porosity and macro-porosity.

The porosity that is present in carbon graphite and graphite exists uniformly throughout the material. If untreated, air and fluids can leak through the body of mechanical seals. Porous materials will also not be able to support the hydrodynamic film required to effectively run carbon graphite and graphite bearings in low viscosity liquids.

From industrial bearing and pumping industries to the aviation and even medical device field, vacuum pressure impregnation is a key tool to take advantage of.

What Are The Benefits Of MVPI?

By sealing and reducing porosity, the impregnation process serves many benefits, including:

  • Enhancing material strength and stiffness
  • Improving thermal properties
  • Increasing current carrying capacity
  • Improving lubricity in severe service conditions

The end benefit is that MVPI ensures product quality, extends product lifetime, increases productivity, and reduces costs.

These materials can be enhanced through metal impregnation. Molten impregnation significantly enhances the performance of high current carrying and heat-dissipating materials.

What Metals Can Be Used In MVPI?

You may have materials you’ve never even thought of impregnating with metal. Perhaps it seems easier to simply toss old, porous materials in exchange for something stronger.

The impregnation process can provide the strength and properties you need and can be performed on any porous material with a high melting point that is not wet by molten metal. MVPI fills the porosity with stable metals resistant to attack from heat, oils, or chemicals such as:

  • Copper
  • Silver
  • Bronze
  • Babbitt
  • Antimony
  • Nickel Chrome

Across a variety of industries, from aerospace and energy to industrials and food, it’s important for part manufacturers to provide sealed components that meet the consumer’s highest expectations. Through a variety of metals, the impregnation process can deliver that satisfaction with guaranteed results supported by the science of vacuum pressure impregnation.

Related Articles

Related Whitepapers

10 Ways To Kill Your Centrifugal Pump

Centrifugal pumps are reliable, low-maintenance pumps. They are worldwide good for > 40% of all fluid transfer in industry. The centrifugal pump has a very…

Improving Tank Level Management with Innovative Altitude raybet 雷竞技 [Infographic]

Traditional altitude valve solutions DON’T cut it. In fact, they: Fail to provide adequate tank turnover and ensure water doesn’t stratify and stagnate Provide a drawdown…

Accurate Metering and Superior Handling of Abrasives and Particulates for Polyurethane Processing

Compact, Seal-less Pumps Reduce Costs and Provide Dependable Performance With more than 40 years of experience serving the industry, including many of the major global…

Improve Reliability and Efficiency of your Horizontal Pumps with Graphalloy [Case Study]

GRAPHALLOY, a graphite-metal alloy manufactured only by Graphite Metallizing Corporation, has long been used to provide reliability when pumping low-specific-gravity fluids or when “run dry”…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Sign up for our Newsletter!

Select list(s) to subscribe to


By submitting this form, you are consenting to receive marketing emails from: raybet & raybet 雷竞技 , 2205-C 7th Street, Tuscaloosa, AL, 35401, //www.stokoptom.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact