Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

How to Trouble Shoot a Gasket Leak


How to Trouble Shoot a Gasket Leak

There is nothing worse than being woken up in the middle of the night because of a leak in your piping system… and more often than not,gaskets get the blame!

Application leaks can be dangerous and expensive but at the same time, preventable. Unforeseen expenses due to loss of production increased maintenance costs, and fines could be devastating to a company.

Leaks caused by gasket failures can happen for a variety of reasons:

  • Under compression
  • Over compression
  • Uneven compression
  • Re-usage of gaskets
  • Chemical Attack

Let’s take a step back and talk about the mechanics of bolting; where a force is applied thru the flange to create a seal. This will compress and densify the gasket, reduce porosity, create a sealing barrier at the gasket ID, and will prevent fluid from penetrating and degrading the gasket.

of Gasket Failures
What to look for: What to expect: Remedy:
OVERTIGHTENING • Extrusion of gasket from the flange
• Irregular-shaped gasket
• Inward buckling of Spiral Wound Gaskets
that contain inner rings
• Imprints on the centering rings
• Reduced gasket contact area causing the
gasket to crush toward the ID
• Fluid “pooling” around the ID which can
lead to deterioration of the gasket
• Damaged flanges
• Plant Wide Bolting Procedure as
referenced in ASME PCC-1
• Gasket Torque Values based on the type
of gasket material being used
UNDER TIGHTENING • Little or no flange serration marks
• Little change in gasket thickness after
being compressed
• Fluid to penetrate gasket ID leading to
deterioration of gasket
• Gasket Blowout/Leakage
• Plant Wide Bolting Procedure as
referenced in ASME PCC-1
• Changing bolting material
• Multiple compression lines/double patterns • Gasket Leakage • Stop the re-use of gaskets
CHEMICAL ATTACK • Gasket Cracking
• Softening of Material
• Tearing
• Erosion of Material
• Uneven material discoloration
• Gasket Leakage • Review chemical compatibility
• Updating storage visual aids to identify
different types of gasket materials
• Improve storage requirements

It is important to always contact the gasket manufacturer to ensure the right gaskets are being used in each application. If there is any confusion about the required information for your application, please fill outDurlon’s Gasket Application Data Sheet.

Related Articles

Related Whitepapers

Carlsberg taps into process water reuse with onsite treatment

Carlsberg brewery wants to cut its water use by 50% by 2030. The initiative, Zero Water Waste, is part of Carlsberg’s Together Towards Zero program.…

Water and Wastewater Industry Checklist for Variable Speed Drives

Resilience is the ability to cope with, and recover from, disruption and to anticipate trends and variability in order to maintain services for people and…

Overcoming energy efficiency challenges in the water and wastewater industry

Water demand is continuing to increase as the global population grows. Clean water is required by people for drinking, cooking, and washing, and by industrial…

Always-on Steam Trap Monitoring Yields 2.9x Return & Reduction of CO2 Emissions [Case Study]

In 2020, Trinity Manufacturing, a premier manufacturer of specialty agriculture and water treatment chemicals, engaged Everactive to help deliver on its safety, sustainability, and operational…


Leave a Reply

Your email address will not be published.

Join the #PumpTalk Community

By submitting this form, you are consenting to receive marketing emails from: raybet & raybet 雷竞技 , 2205-C 7th Street, Tuscaloosa, AL, 35401, // You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email.Emails are serviced by Constant Contact