Generic selectors
Exact matches only
Search in title
Search in content

Pump for conveying C starch

Boerger LLC
Boerger Pump for conveying C starch

Pump for conveying C starch

By: Boerger

A large wheat mill uses a Börger ONIXline rotary lobe pump for conveying very abrasive C starch. The wheat starch is separated from the wheat gluten in a three-phase decanter. A by-product arises in the process, the so-called C starch. The C starch with a viscosity of up to 5,000 mPas runs from the decanter into an underflow tank. The underflow tank is equipped with a fill level sensor and must not be filled with more than 20 – 30% of its volume. As soon as the threshold value has been exceeded, the Börger ONIXline rotary lobe pump sucks the C starch from the underflow tank and pumps it into the product tank. The by-product is stored here as long as it is collected by tanker trucks for further use as animal feed.

The ONIXline rotary lobe pump operates 24 hours on 7 days a week for 365 days a year. The speed and, thus, the flow rate is regulated by means of control technology. The pump is equipped with Börger double-acting mechanical seals. The seals designed as a cartridge unit are pressurized by means of a barrier pressure system. This prevents any pumped medium from penetrating between the sliding surfaces of the seals.

The operators of the mill are very satisfied with the Börger ONIXline rotary lobe pump. The pump has operated without interruptions since its installation. Replacing the wear parts has not been necessary so far.

Application data:
Pump type: Börger ONIXline BL 190
Pumped medium: Wheat C starch
Viscosity: Max. 5,000 mPas
Temperature: 10 – 50°C
pH level: Neutral
Flow rate: 30 – 35 m3/h
Speed: 300 – 330 rpm
Working pressure: 2 – 4 bar

Technical data:
Casing: Stainless steel, 1.4409
Casing protection plate: Stainless steel
Static O-rings: FKM
Shaft seal: Börger double-acting mechanical seal, as a cartridge unit
Rotors: Primus, dual-lobe, screw profile, stainless steel
Drive: Helical geared motor, 11 kW

Benefits of this Börger ONIXline BL 190

  • Pressure-resistant
  • Pressurized, double-acting mechanical seal
  •  Self-priming
  • Flexible flow rate
  • Short-term dry-run capability
  • Pumping of highly viscous media
  • Ease of maintenance with MIP (Maintenance in Place)

Related Articles

Boerger Pump for emptying tank wagons

Pumps for emptying tank wagons

A petrochemical company uses two ONIXline rotary lobe pumps for emptying tank wagons. The pumps with dry-run capability convey methyl…

Related Whitepapers

Overcoming Clean-In-Place Challenges in Hygienic Applications with Mouvex® H-FLO Series Pumps

Clean-In-Place (CIP) Challenges There are numerous challenges that must be overcome when cleaning a hygienic pump installation. This is especially true when using a clean-in-place…

Power Transmission Solutions for Hydraulic Fracturing Applications

Altra Industrial Motion provides advanced power transmission solutions for hydraulic fracturing applications. The well-recognized brands of Altra Industrial Motion supply technically advanced universal joints, couplings,…

Evolution of Pumping Technology and Superior Performance

This document begins with a history of the development of variable speed technology, explaining the efficiency improvements associated with each development step. Also presented is…

Engine & Turbine Manufacturer Achives Annual Savings of $245,000 [Case Study]

Find out how Grundfos iSOLUTIONS delivered significant energy savings and system optimizations for a leading engine and turbine manufacturer. A leading UK engine and turbine…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Join the #PumpTalk Community


By submitting this form, you are consenting to receive marketing emails from: raybet & raybet 雷竞技 , 2205-C 7th Street, Tuscaloosa, AL, 35401, //www.stokoptom.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact